Post your intros here.

Fliphm00b wrote:

^ha nice! I took pics of ur car too!! Small world u going to be at the GG meet?

Yep I will be there at the meet!

Alright I got some time.

Name: Matt Davis
Car: 1994 GS300
Joined: ??? a week or 2 or 3 after it started

Exterior:

Aristo bumper
Aristo headlights
Aristo window visors
CF b-pillar overlay
35% Suntek Carbon series tint
dent n ding here n there (its a 94 and i need alotta moneys)
Chrome "lexus" license plate frames

Interior:

2 tone Katzkin leathers
JP neckpads
JP curtains
woodgrain kit (could use a better one)

Lighting:

6000k lows
3000k fogs
LED's in gauges, climate control, PRND2L, door panels, and C-pillars

Wheels/Suspension/brakes:

19x8.5 +38F/ 19x9.5 +38R Racing Sparco NS-6 (summer)
245/35/19F & 275/30/19R Falken Azenis ST-115's
BC type BR coilovers (Tein CS-t's in garage trying to SELL!!!!)
SPC 2nd gen GS adjustable upper control arms for the front (no camber wear!!!! )
'97 Supra Turbo Calipers F&R
Stoptech slotted rotors (Supra specs o'course)
OEM Toyota brake pads
Techna Fit SS lines- GS300
Supra Turbo 17" wheels black/red (winter)

Audio:

Couldnt tell ya much off the top of my head
JVC head unit I got the month I bought the car 4 years ago.
Infinity components up front. I'd have to get the box but they're bigger then OEM
2 12" Alpine Type R subs
and 2 amps.....again I'd have to look at them to get you a model.
Audio and Electrical is NOT my area

Engine:

K&N drop in
stickers on the air box
Tons of maintenance put into the OEM motor. Will drive N/A for a while so Im going to rack up the miles. At 194,4xx right now. Almost 200k!!!

New plugs, wires, cap, rotor, intake mani Y-pipe, new intake mani gasket, cleaned throttle body, new cam cover seals, new timing belt, serpentine belt, front main seal, new brake compression unit, new radiator, new hoses here and there, new thermostat. Could be forgetting some stuff but who knows.

Could have had a TT swap already but then it just needs more and more money and attention so I'll get to that when I start driving at UPS later this year and make the good money.

Future Plans:

In dash/double din screen/nav
OEM wood steering wheel (off a LX)
gated shifter from an LS
Paint/body work
V-lene kit
New wheels


All old pictures! old coils, old camber, old bumper, old lots of stuff

Dang, I remember back in the day when you didn't have that much stuff done to it... its fun watching others progress over time lol

Chili wrote:

Dang, I remember back in the day when you didn't have that much stuff done to it... its fun watching others progress over time lol

^^ lol I didn't realize that writing that could have meant for both DC5 and MKIII haha

Chili wrote:

^^ lol I didn't realize that writing that could have meant for both DC5 and MKIII haha

Dc51717 wrote:

OH someone got jokes.

This is for Chili my future plans really is to keep my car clean and try n go the flush route but as you can see my wheels aren't that aggressive.. I might even sell my SSRs to get something with a better offset and width.. I'd rather work on the exterior for now. For interior i just want some seat covers idk if you've seen them but their called Clazzio seat covers not some autozone ish n maybe a reupholstry.. I don't really have any more interests to performance parts except for maybe more of the rare parts like the ARC Intake. I would like some help from people that have done this before (hellaflush route) and if they can maybe give me tips.

wow bout time some other members post on here haha. Nice cars.

Since i dont feel like editing my post (cause i dont know how LOL) I'll post here about my future mods:

FnF Ver. 1 coils
Racing seats w/ harness (dont know what kind yet)
Stage 1 clutch and flywheel (either clutchmasters or exedy/fidanza)
Custom roll cage
Header
new steering wheel (prob sparco)
And maybe next year (if i dont go to japan) motor swap.. 2ZZ-GE and just build that...

Fliphm00b wrote:

This is for Chili my future plans really is to keep my car clean and try n go the flush route but as you can see my wheels aren't that aggressive.. I might even sell my SSRs to get something with a better offset and width.. I'd rather work on the exterior for now. For interior i just want some seat covers idk if you've seen them but their called Clazzio seat covers not some autozone ish n maybe a reupholstry.. I don't really have any more interests to performance parts except for maybe more of the rare parts like the ARC Intake. I would like some help from people that have done this before (hellaflush route) and if they can maybe give me tips.

That is actually good to hear that you would possibly get rare parts such as ARC and etc... because I was somewhat disappointed when I heard you say you just wanted to lower the car more, get a lip and be more flush and call it done. I don't think anyone on the team is actually Hellaflush. But I am sure that we can all help you out to achieve that goal.

L0st... wrote:

wow bout time some other members post on here haha. Nice cars.

Since i dont feel like editing my post (cause i dont know how LOL) I'll post here about my future mods:

FnF Ver. 1 coils
Racing seats w/ harness (dont know what kind yet)
Stage 1 clutch and flywheel (either clutchmasters or exedy/fidanza)
Custom roll cage
Header
new steering wheel (prob sparco)
And maybe next year (if i dont go to japan) motor swap.. 2ZZ-GE and just build that...

I don't know if you know this but whatever harness and roll cage you get... MAKE SURE that it will be legal on the kind of events that you will be doing. I have heard that Takata Harnesses are not allowed due to that it doesn't meet U.S. safety regulations, even though Takata makes the OEM Honda Seat belts lol. Oh yea, Harnesses EXPIRE hahaha.

^^Yea i know that stuff. Thanks. I learned all the regulations for the autox bible lol
Gets kinda confusing though...
http://cms.scca.com/documents/Solo_Rules/2009_Solo_Rules.pdf

L0st... wrote:

^^Yea i know that stuff. Thanks. I learned all the regulations for the autox bible lol
Gets kinda confusing though...
http://cms.scca.com/documents/Solo_Rules/2009_Solo_Rules.pdf

Great source of information!

my name is ace (currently not in imperial crew but working on it)
i drive an 08 silver tC
engine:
-INJEN (CAI)
-WEAPON-R 4-2-1 header
-Agency Power midpipes
-HKS axle-back
-NGK iridium spark plugs
-ROYAL PURPLE motor oil

interior:
-WINK rear view mirror(thanks for mark)
-oem floormats

exterior:
-RS1 front lip(FLAT BLACK)
-i LOVE haters decal
-oznium angel eyes
-customize upper grill
-BRONZE painted oem rims
-12k H.I.Ds
-1st gen front headlight
-1st gen taillights
-oem mudguards
-shorty antenna

drivetrain:
-MEGAN shortshifter
-DR.ISOTOPE cable and cage bushings
-ROYAL PURPLE fluid

miscellaneous:
-AEM oil cap
-TRD radiator cap
-GREDDY radiator panel

suspension:
-front strut bar
-GREDDY rear strut bar
-INGALLS dampener

FUTURE MODS:
-APT foglights
-ST front and rear sway bars
-CF HOOD & CF HATCH
-UNICHIP
-coilovers
-still thinking of BOOSTIN' it or doing some internal work...

^Oy Welcome!!! Hahaha wheres the pics bro?

Wassup Guys.
My name is Elias. Been with Imperial from the start of the crew.

Got a Pearl White 01 IS300


engine:
-SRT Intake
-HKS Dragger II

suspension:
-Tein S Tech Springs

Wheels:
-19 in TSW Kayalami (currently off the car and trying to sell. Its time to upgrade)

Electronics
- Alpine DVD double din head unit
- 1 12inch JBL Sub
- Infinity mids & highs
- 1 2ch JBL amp
- 1 4ch JBL amp


FUTURE MODS:
-Monitors to be installed on the head rests and also on the two sun visors
-New Wheels
-coilovers

herro im M00m00c0ws aka da Trung....i like long walks on the beach, puppies, folding laundry, scented candles, swiffer wet jets, blowing the spores off dandelions, picnics.

08 Scion tC

Engine
n/a

Exhaust
Buschur Racing Spipe back

Suspension
Tein S tech =(

Interior
Autopower street roll cage
2 Sparco sprint5
razzo weighted shift knob
Some Knock off deep dish steering wheel with momo horn
NRG short quick release
NRG short hub
SRS harness
plaid with some lil skull headliner

Electronics
Alpine Type S sup
some crappy amp
Power Enterprise VVTI controller
electrical tape

Wheels
Volk GR-C 17x8 +36

Exterior
VIS carbon hatch
Carbon exhaust heat shield
RS3 kenstyle grille
RS1 lip
home made eye lids =D

Future mods
Coils
Spacers



1990 240sx

Engine
KADE24 DOHC swap

Interior
S14 driver seat
Full weld in roll cage with driver door bar
r32 shift knob
short shifter

Exterior
lots of dents

Wheels
16x7 some 2 piece reverse mesh wheels (front)
16x8 some 2 piece mesh wheels
25 mm spacers front and back

Suspension
Megan track series coils

Exhaust
JIC cat back

Future Mods
MAKE IT RUN AGAIN! ><

Welcome trung! Thanks for posting yo!

Hi I'm Kevin.

hola amigo. They call me Puke-Master-Flex

I guess its about time i posted my Intro:
I'm Ray I drive a 2003 IPB Lexus IS300 5Spd
I've been member since before it was Imperial and I'm glad i made the right choice ....

My forte is goin sideways...did i mention that.....

"Girls love it when I hit it sideways......
......Its a Drift thing =P "


Mods I have done to the car:


Engine

• Generic Ebay Headers and downpipe
• Generic Ebay Mid Pipe
• Modified Kakimoto Exhaust from Supra
• Figs Heat Shield
• Injen Short Ram Intake w/ Spectre High Flow Wire Mesh Filter
• Weapon-R Engine Damper modified to install with Strutbar
• APEXi SAFC II

Exterior Styling

• Vizage Grill
• V-Speed (Vizage Replica) Front Lip
• C-west Sideskirt
• L-Tune Rear Lip
• L-Tuned Roof Spoiler
• L.E.D. Tail and Trunk Lights or (Smoked Tail and Trunk Light)
• Altezza Replica Tail Covers
• Lamin-X Tinted Head, Fog, Tail, and Trunk Lights
• L.E.D. DRL bars in Vizage Vents
• L.E.D. Highbeams converted to fog switch
• Modified Foglights switched to Highbeams inside Grill
• 10K HID kit in Highbeam Foglights
• 8K HID Lowbeams and stock foglights
• JDM Altezza Clear Foglights
• Stubby Antenna

Suspension

• Meagan LP Coilovers
• TC SportLine Front Rear Strut Bar
• Altezza Front Rear Lower Braces (Not Installed)

Audio/Video

• Grom Audio Thumb Drive/Aux/Ipod Integration

Drivetrain

• Kaaz 2way LSD
• Ralzco Short Throw Shifter

Wheels

• (F) 205/45/17 (R) 215/45/17
• Works Euroline (F) 17x8 +25 (R) 17x9 +20
• Gram Light Replica (F) 17x8 +30 (R) 17x9 +30
• Stock IS Wheels

Fluids

• Royal Purple 5W-30

Miscellaneous:

• Junction Produce Kneck Pads
• Cut out stock bumper grill
• License Plate Relocator
• AAC Carbon Fiber Radiator Cooling Plate (Painted)
• Figs Hood Shocks
• O2 Sim CEL Fix


There's a few other thingz but i'll update when i remember and feel like typing them =p

IFO 2010

Shouldn't those pics be under the photos section? lol

They are...i jus posted them here too as part of the intro....i was too lazy to add em the previous post =P

okay mark asked me to join i was like "ok" lol jk

my names pete, i have a csm 2005 scion tc.

no turbo, but get me in plenty of trouble as is so yeah im going to track it soon.

heres some pics

im not goin to bother with a mod list.....its too long.













well thats as much torture as i want to put you all through...lol anyways good to be aboard and liking all the cars here a lot so far.